Track cross links

[Averyman]

I have about 100 links and reinforcement cleats on a couple of old tracks that were used on a swamp buggy that I bought years ago at an auction sale. Anyone need them? What is the going price?
Thanks, Clarence

[Cranman]

Do you know what kind of buggy the tracks came off? If not could you post the actual width of the cleats and the hole size and spacing as there may be people out there that could ude them if they aren't too badly worn.  Bob

[Averyman]

Here are the track cleat dimensions... Outer holes 14 1/2 " center to center and inner holes 8" c to c. Holes are 11/32" diameter on 3 1/4" centers for 5/16" bolts.  This is the same bolt pattern as on my B-12 tracks. Overall length is 16" which is nearly 1/2" longer than on my tracks.   They show a little wear but have many good miles left in them yet. At present they are still attached to the old tracks.  We had a big snowfall here in Brandon and I took the machine for a short run yesterday.. I'm hooked!!
Clarence

[Swamp Dawg]

You can post this in the for sale section so people can find it.  For some reason I never seen this topic before.

[the old trucker]

   Can the cross link from a muskeg fit on the old bombardier ?? I was told they are a little thicker but they fit. He wants $ 2.00 each & has close to 200 of them. Any thoughts from anybody ??
                                                       
                                                                OT.   

[Cranman]

If the cleats are from the old off set tracks from the pre 1960 buggie it may be ok. Seems to me they were turned up on one side for traction but the length likely was the same as bomb cleats and I thing the bolt holes were the same.

[the old trucker]

  Has anyone seen this setup around ?? Any thoughts about them ?? I was thinking that they would make the machine slide around allot on ice..

http://i333.photobucket.com/albums/m366/theoldtrucker/grousercleats.jpg