General Forums > Wooden Bombardiers

floor plywood

<< < (2/2)

48bomber:
Some great sugestions that I will look at for sure. I think I will make the floor and end panels fit better to help with noise and smell. I checked the manifold ,and can not feel any leaks. I think I will spend some time driving it before I seal it off due to the heat concerns. I never thought of the diff temp !
   48 bomber

the old trucker:

--- Quote from: Stuk-n-Slush on December 03, 2009, 07:10:29 pm ---On the metal machines there are vents at the front of the floor that can be closed off.This works well  (close in warm weather, open in cold weather). The air will still blow under drivers floor and out the engine doors for cooling.
If you have an oily smell in the cab check your pcv valve.On my old woody I've run a 1" piece of rubber hose from the oil filler tube on the block to a vent on the fender ( stock on the woodys ). This keeps all the smell out of the cab exept the odd spilled rum.

Stuk-n-slush

--- End quote ---
  Stuk-n-Slush do you have any pics of the area that I have highlighted?? I will be starting from scratch with mine.              OT.

Navigation

[0] Message Index

[*] Previous page